get or set network port subnet mask:
netsubm
The value is the subnet mask to be used when static IP address assignment is selected. The value is a valid IP subnet
mask (e.g., 255.255.255.0). If dynamic IP address assignment is used, the subnet mask should be set to 0.0.0.0.
Changes to the network port static subnet mask take effect the next time the amplifier is powered on or rebooted.
Example:
=snetsubm:255.255.0.0!
set static subnet mask to 255.255.0.0
get or set network port gateway IP address:
netgw
The value is the gateway IP address to be used when static IP address assignment is selected. The value is a valid
IP address (e.g., 10.1.2.1). If dynamic IP address assignment is used, the gateway address should be set to 0.0.0.0.
Changes to the network port static gateway IP address take effect the next time the amplifier is powered on or
rebooted.
Example:
=snetgw:10.1.1.1!
set static gateway IP address to 10.1.1.1
get or set network port Telnet port number:
netport
The value is the TCP port number used by the network port's Telnet server. The value must be one of the following
values. Typically, port 23 is used, but the other port numbers can be used if necessary. Changes to the network port
Telnet port number take effect the next time the amplifier is powered on or rebooted.
23
10001
50001
10002
50002
10003
50003
10004
50004
10005
50005
10006
50006
10007
50007
10008
50008
Example:
=snetport:10001!
configure Telnet server to listen on port 10001
get assigned IP address (valid for get only):
netasgip
The value returned is the IP address assigned to the network port. This can be used to get the IP address assigned in
dynamic (DHCP/BOOTP/AutoIP) mode.
Example response:
=snetasgip:192.168.1.107!
assigned IP address is 192.168.1.107
get assigned subnet mask (valid for get only):
netasgsubm
The value returned is the subnet mask assigned to the network port.
Example response:
=snetasgip:255.255.255.0!
assigned subnet mask is 255.255.255.0
!
!
!
!
!
!
!
!
!
!
!
!
31
Содержание POWERSHAPE PS-2.1
Страница 2: ...This page intentionally left blank 2...
Страница 7: ...INSTALLATION There are two factory presets for quick setup Conference Classroom 1 2 7...
Страница 10: ...BLOCK DIAGRAM 10...