15
4. To remove the batteries push firmly on the back (the end opposite the
terminals) of each battery in the direction of the terminals while prying upward.
The battery should snap out of it’s clips back end first.
Figure 6: PicoDAC Battery Removal
To insert the new batteries simply reverse the previous action. First insert the terminal
end of the battery by slowly prying it between the clips. Next press down on the body of
the battery. It should snap into place. Ensure that it is making good contact with the
connection terminals.
Replace the top cover of the PicoDAC by sliding it back into place. Re-tighten the
thumb screws and the PicoDAC is again ready to use.
For applications where longer battery life is needed, longer life lithium batteries are
available at many electronics stores.
