Digital Acoustics SPKR-IP-CS-IC, Руководство по началу работы

Страница: 2 / 4

Installation
The controls, connectors and LEDs for the SPKR-IP-CS-IC are located on a
faceplate on top of the speaker. There is also a green LED in the speaker grill
that matches the state of the
Ready LED.
•
Connect the SPKR-IP-CS-IC ceiling speaker to a PoE (802.3af)
network cable. The SPKR-IP-CS-IC will power up within 5 seconds
and request 15.4 watts from the Power Source Equipment
•
The red Link LED will turn solid
•
The red Ready LED will flash 4x per second
•
Once the SPKR-IP-CS-IC ceiling speaker is detected by
InformaCast, the
Ready LED will turn solid
•
Record the ID# from the label on back of the SPKR-IP-CS-IC for
use during software configuration.
•
Optionally, label the speaker grill with one of the extra ID# labels
included in the box
•
Install the connected Speaker in a 2’x2’ ceiling grid and verify that
the green
Ready LED in the speaker grill is on solid
•
Please refer to the Application Note
– IP7 for InformaCast
Installation and Configuration Guide available at
www.digitalacoustics.com/support/application-notes/ for additional
information on installation and setup
Digital Acoustics Technical Support
www.digitalacoustics.com /support