Page 3 of 4
Talk
Master
™
Software
TalkM
aster™ Server Software is a suite of Windows® based application
used to configure and manage Digital Acoustics IP7™ and ii3™ Intercoms
and Paging endpoints. Applications included with the TalkMaster Server are
the
Admin Console
for configuration of the Server and IP Endpoints and the
Operator Console
for managing 2-way Intercom calls and 1-way Paging
announcements.
•
Install the TalkMaster Software using the Software Installation CD
•
Refer to the previous section to power up and connect the IP7 series
device to the network.
•
Record the unique ID# from the bottom label of the IP Endpoint and note
the location where it will be installed
•
Start the Admin Console and logon with an
Operator ID of
admin
and the default password
of
admin
•
Click the
Settings
→
Endpoint
Defaults
tab and make any
changes required for your
installation. For instance, if you
want to assign static IP Addresses,
uncheck the
Assign Automatically
with DHCP
checkbox
•
Click the
IP Endpoints
tab and press the
FIND ALL
button in the lower
right hand corner of the screen. Newly discovered IP Endpoints appear in
the list
•
Click on the IP Endpoint to be configured (the “Icom ID” column must
match to the Intercom’s previously recorded ID#)
•
Click the
Defaults
button and enter a descriptive
name into the Location Name field
•
Make any other desired changes, then select the
Options 1
tab
•
Check the
Use UDP/RTP
option
•
Check the
Supports Full Duplex
option
•
Select the
Options 2
tab
•
Click the
SET
button to select the
Audio Profile
specified for the Call
Station that is connected to the IP7-
FD
Optional configuration settings include:
Options 1
tab
The IP7 has an on board
Relay
and
Sensor
.
i
Please refer to the
TalkMaster Admin Console Reference Manual
on the
Software Installation CD
for additional information software setup options
