DIGISYSTEM LABORATORY INSTRUMENTS INC.
to set the speed value. Push the button or any other function button to enter the speed value.
When you setting the RPM value, you can monitor the RCF value on the RCF/TIME display screen.
6.
Push the button , the time value is flash on the screen. Push the button or or
to set the time value. Push the button or any other function button to enter the time value.
7.
After setting parameters, push the button to start the centrifuge. During operation, you can push
the button to stop the centrifuge. During operation, you can push the button to switch the
remaining time or RCF value on the RCF/TIME display screen.
8.
Push the button to start the centrifuge directly. Release the button and the centrifuge will stop
immediately. The centrifuge will run to the current speed setting value.
9.
Under
the conditions of power failure or the open function failure, please insert the “Emergency Bar”
into the hole at right hand side of centrifuge to force the lid open.
Maintenance and care:
1.
Keep the centrifuge clean all the time. Cleaning can be done with a damp cloth. Avoid the use of
solvents as they may damage the product housing, rotor.
2.
Check if the rotor is in the center. In case, the rotor is slanted. Stop using machine and contact the
distributor for repair.
Circuit Diagram:
