Digisol DG-WR3001NE, Быстрое руководство по установке

Страница: 3 / 8

This wireless range extender includes Wireless AP, Wireless repeater, and
USB Port for charging other devices.
NOTE : You must reset DG-WR3001NE to factory default settings first
(press reset button for 10seconds) , only incase if you have done some
settings before.
Power Connector For power supply
Reset button Press for 10 seconds to factory reset the configuration
WPS button Press for 2 seconds to start WPS connection
weak signal
good signal
strong signal
ON: power is on
OFF: power is off
Blinking: WPS connection is initiated
ON: Ethernet connected
OFF: Ethernet disconnected
USB port For Charging Devices , Output Upto 5V-0.5A
Ethernet port For connecting Ethernet Enabled Devices
Wifi LED
Power(WPS) LED
Ethernet LED
1. Power Connector
2. Reset button
7. USB port
4. Wi-Fi LED
5. Power (WPS) LED
6. Ethernet LED
8. Ethernet port
3. WPS button
Product introduction
Wireless AP/ Extender Quick Installation Guide