Digisol DG-WA3000N, Быстрое руководство по установке

Страница: 6 / 18

Below given is the Access Point interface description.
Hardware Installation
Fix two detachable dipole antennas to the antenna connectors of the
Access Point.
Connect the Access Point to ADSL modem, router, or switch/hub in
your network through the LAN port of the Access Point by using
Ethernet cable.
Connect the power adapter (5V DC, 1A) to the wall socket, and then
connect the other end of it to the ‘Power’ socket of the Access Point.
Please check all the LEDs on the front panel. ‘PWR’ LED should be
steadily ON, ‘LAN’ LED should be ON if the Access Point is correctly
connected to the ADSL modem, router or switch/hub.
1
Please follow the below mentioned instructions to build the network
connection between your new wireless Access Point and your
computers, network devices:
Interfaces Description
Antennas
Two reverse SMA antenna connectors for screwing detachable
antennas enclosed with the product.
Power Power connector, connects to power adapter.
LAN Local Area Network (LAN) port.
Reset / WPS
Reset the Access Point to factory default settings (clear all settings)
or start WPS function. Press this button and hold for 10 seconds to
restore all settings to factory defaults, and press this button for less
than 5 seconds to start WPS function.
2
3
4