DG-WA1102NPLV2 User Manual
5
Please refer
Fig. 2
for PoE Power and AP configuration
Fig. 2 Diagram of PoE Power and AP configuration
Attention
Please make sure our AP is working with included Power adapter or PoE
adapter, and under right connection way, or the device will be damaged
.
2
nd
: AP Start and Login
1) Power the AP as shown in Fig. 2
2) Set a fixed IP address for this computer: The default operation mode of this outdoor AP is Wireless
AP, end users should set an IP address for the computer, then they can access the Outdoor AP by it’s
IP. Set the computer’s IP address as 192.168.1.X (X is number between 1-252), make it same as AP’s
network segment, then set Subnet mask as 255.255.255.0, Default gateway leave it blank, and click
OK.
A.: Please follow
Fig. 3
and
Fig. 4
for wired configuration.
Fig. 3 Configure the computer’s IP address (by wired)
DG-WA1102NPL
DG-WA1102NPLV2
