Digisol DG-SR3004, Быстрое руководство по установке

Страница: 11 / 12

11
Following are the solutions to problems that may occur during the installation and
operation of the NVR.
1) The NVR cannot boot up normally.
 The power supply is not correct.
 Switch power supply line is not in good connection/damaged.

The program updation is wrong.

The hard disk is damaged or the hard disk lines are broken.
 The front panel is damaged.
 The main board of the NVR is damaged.
2) The NVR reboots automatically or stops working after boot up.

The input voltage is not stable or too low.

The hard disk is damaged or the hard disk lines are broken.
 The power of the switch power supply is low.
 Bad heat radiator or too much dust or bad running circumstance for the
NVR.

The hardware of the NVR is damaged.
3) System cannot detect the hard disk.
 The hard disk power supply line is not connected.

The cables of the hard disk are damaged.

The hard disk is damaged.

The SATA port of main board is damaged.
This product comes with Two Years warranty. For further details about warranty
policy and Product Registration, please visit support section of
www.digisol.com