Digisol DG-GS4600SE2 Series, Руководство по установке

Страница: 15 / 20

DG-GS4600SE2 Installation Guide
Chapter 2-5
in operation. Otherwise the laser may hurt your eyes.

Do not attempt to conduct the operations which can damage the switch or which can
cause physical injury.

Do not install, move or disclose the switch and its modules when the switch is in
operation.

Do not open the switch shell.

Do not drop metals into the switch. It can cause short-circuit.

Do not touch the power plug and power socket.

Do not place the tinder near the switch.

Do not configure the switch alone in a dangerous situation,

Use standard power sockets which have overload and leakage protection.

Inspect and maintain the site and the switch regularly.

Have the emergence power switch on the site. In case of emergence, switch off the
power immediately.
Caution!
Potential risk include: Electric leakage, Power supply arcing, Power line breakage,
Imperfect earth, Overload circuit and Electrical short circuit. If electric shock, fire, electrical
short circuit occurs, please cut off the electricity supply and alarm rapidly. Rescue the
injured person in the contingency under inherently safe, give the injured person proper
fireset aid treatment according to the injury state, and seek help from the Medical
Emergency using various ways.
2.2 Installation Preparation
2.2.1 Verify the Package Contents
Please unpack the shipping package and verify carefully the contents inside.
2.2.2 Required Tools and Utilities
The required tools and utilities are shown below:

Cross screwdrivers

Flat-blade screwdriver

ESD wrist strap

Antistatic uniform