Digisol DG-GS4526P Скачать руководство пользователя страница 13

 

 

DG-GS4526P Installation Guide 

 

13

2.1.2 Installation Notice 

  Read through the installation instruction carefully before operating on the system. 

Make sure the installation materials and tools are prepared. And make sure the 

installation site is well prepared. 

  During the installation, users must use the brackets and screws provided in the 

accessory kit. Users should use the proper tools to perform the installation. Users 

should always wear antistatic uniform and ESD wrist straps. Users should use 

standard cables and connecters.   

  After the installation, users should clean the site. Before powering on the switch, 

users should ensure the switch is well grounded. Users should maintain the switch 

regularly to extend the lifespan of the switch. 

2.1.3 Security Warnings 

 

When using SFP transceiver, do not stare directly at the fiber bore when the switch is 

in operation. Otherwise the laser may hurt your eyes. 

 

Do not attempt to conduct the operations which can damage the switch or which can 

cause physical injury.   

  Do not install, move or disclose the switch and its modules when the switch is in 

operation.  

 

 

 

Do not open the switch shell.   

 

Do not drop metals into the switch. It can cause short-circuit.   

 

Do not touch the power plug and power socket. 

 

Do not place the tinder near the switch. 

 

Do not configure the switch alone in a dangerous situation, 

 

Use standard power sockets which have overload and leakage protection.   

 

Inspect and maintain the site and the switch regularly. 

  Have the emergence power switch on the site. In case of emergence, switch off the 

power immediately. 

Caution! 

Potential risk include: Electric leakage,Power supply arcing, Power line breakage, 

Imperfect earth, Overload circuit and Electrical short circuit..If electric shock, fire,electrical 

short circuit occurs,please cut off the electricity supply and alarm rapidly. Rescue the 

injured person in the contingency under inherently safe,Give the injured person proper 

first aid treatment according to the injury state,and seek help from the Medical Emergency 

using various ways 

Содержание DG-GS4526P



















Отзывы: