Digisol DG-BG4300N Скачать руководство пользователя

Страница: 74 / 103

DG-BG4300N User Manual

IP hosts use Internet Group Management Protocol (IGMP) to report their multicast group

memberships to neighboring routers. Similarly, multicast routers use IGMP to discover which of their

hosts belong to multicast groups. This device supports IGMP proxy that handles IGMP messages.

When enabled, this device acts as a proxy for a LAN host making requests to join and leave multicast

groups, or a multicast router sending multicast packets to multicast group on the WAN side.

When a host wishes to join a multicast group, it sends IGMP REPORT message to the device’s IGMP

downstream interface. The proxy sets up a multicast route for the interface and host requesting the

video content. It then forwards the Join to the upstream multicast router. The multicast IP traffic will

then be forwarded to the requesting host. On a leave, the proxy removes the route and then forwards

the leave to the upstream multicast router.

7.1.1 IGMP Proxy Configuration

The IGMP Proxy page allows you to enable multicast on WAN and LAN interfaces. The LAN

interface is always served as downstream IGMP proxy, and you can configure one of the available

WAN interfaces as the upstream IGMP proxy.

Upstream:

The interfaces that IGMP requests from hosts are sent to the multicast router.

Содержание DG-BG4300N








































































































Результаты поиска

Содержание DG-BG4300N

Отзывы:

Похожие инструкции для DG-BG4300N

Бренды по названию

Популярные бренды

Digisol DG-BG4300N, Руководство пользователя

Результаты поиска

Содержание DG-BG4300N

Отзывы:

Похожие инструкции для DG-BG4300N

Бренды по названию

Популярные бренды