Start Your Installation
Remove the Back Cover
Please follow these instructions to remove the cover on the back panel of the AIO so that
you can hookup the cables to associated connector.
Figure A
1. To remove the back cover, follow the arrows in
fi
gure A and pull out with your
fi
ngers and
the cover should be removed from the stand.
2. Attach the cover back to the AIO stand by pressing
fi
rmly until the tabs snap into place.
You may also keep the cables in order by using the cable organizer.
!
Note!
You can place the AIO fl at horizontally to make it
easier to connect the cables. Please make sure
that you place it on an even surface lest the AIO
should be damaged by scratches or collision.
included cables organizer
6
