Chapter 4 First Operation
29
Chapter 5 Monitor
At
MONITOR tab
, users can not only setup overload current, high alarm and
low alarm of total current, branch1 and branch 2 but view relevant peripheral
parameters of total current, branch current, voltage, frequency, power factor,
watts, Kwh and device temp.
5-1 Peripheral state
Display total current, voltage, power factor, device temp and watts; setup
overload current, high alarm and low alarm of total current, branch1 and
branch 2.
(1) Voltage
: Display the voltage of the current input power
(2) Frequency
: Display the voltage frequency of current input power (only
applicable built-in Wart-hour module).
(3) Power factor
: Display the power factor of current input power (only
applicable built-in Wart-hour module).
(4) Device Temperature
: Displays the current temperature of the device.
Содержание SMLW 12 Series
Страница 1: ...1...
