3
www.digiop.com
© 2011 Digiop, Inc. All rights reserved.
Attach your camera to the network, power it on, and configuring it with new network settings
1.
Connect the camera to the LAN and apply power to the camera. Wait until the initialization process
completes (2 to 4 minutes) before continuing.
2.
Open the IPAdminTool directory on your computer, then double click the file
IPAdminTool.exe
to
start the application. When the IPAdmin Tool starts, it will discover all the IP devices it supports that
exist on the network. The discovery process may take a few minutes.
3.
In the Product list, find the entry with the same MAC address as the camera you installed. If the
camera is not shown, click
Refresh
once a minute to update the list.
4.
Right click on the entry for your camera and select
IP Address
.
Static Option
5.
In the IP Setup window:
a.
Select the
Static
option if it is not selected.
b.
Enter the new IP address for your camera into the IP Address field.
c.
Enter the subnet mask of your computer into the Subnet Mask field.
d.
Enter the gateway of your computer into the Gateway field.
e.
Click
SETUP
. A Login window will open.
6.
In the
Login
window, enter the ID and PW
(password) for your camera and click
Login
. The
default administrator values for the ID and PW are
root
and
pass
.
7.
In the IPAdmin Tool window, click
Refresh
. Verify that the entry representing the camera now
shows the new IP address.
Step 5. Setup camera Basic Configuration
To view video images from the camera, at a computer attached to the LAN where the camera is installed,
open Microsoft
®
Internet Explorer and go to:
http://<IP address of the camera>
If the IP address is 192.168.1.201, enter:
http://192.168.1.201
If prompted to install ActiveX controls such as AxAll.cab (publisher Cap Co), AxPTZ, or AxNVC, follow screen
prompts to install the software.
NOTE
To load these ActiveX controls, you may need to adjust the security settings of your browser to
accept add-ins from unknown publishers.
After logging into your camera, if you cannot see live video from the camera and the message: “Can not
Create XMLDOMDocument Install MSXML4.0” appears, download and install the MS XML 4.0 library. This
library can be found at:
http://www.microsoft.com/downloads/details.aspx?familyid=3144B72B-B4F2-46DA-B4B6-
C5D7485F2B42&displaylang=en
After the camera VIEW screen appears, click
SETUP
and enter the default User name and Password,
root
and
pass
.
In the SETUP window, go to
Basic Configuration
>
Users
.
In the User list, click
root
to highlight it, and then click
Modify
. Enter a new password and click
OK
. In the
Users screen, click
Apply
, and then click
OK
to restart the server.
Go to
Basic Configuratio
n >
Date & Time
.
On the Date & Time screen, set the Time Zone, Method, and Time Synchronization options. Click
Apply
.
Click
VIEW
to exit SETUP mode and return to the web viewing screen.
