Digiop BLK-DH200400D Скачать руководство пользователя

Страница: 27 / 105

H.264 DVR User Manual

SECTION 3: SYSTEM SETUP

Item

Description

SET DATE & TIME

To set the date and time, move the cursor to SET DATE & TIME submenu button using the

, and

buttons, then

press the

SEL

button.

In the SET DATE & TIME window, use the

and

buttons to change the timestamp component value, then press

SEL

confirm it and move to the next field. To move to another field without changing it, use the

and

buttons. Highlight

the

button and press

SEL

to confirm your selection and close the window, or press

ESC

button to return to SYSTEM setup

menu.

DAY LIGHT SAVING: Move the cursor to DAYLIGHT SAVING using the

and

buttons, change the option shown with the

and

buttons, then press

SEL

to confirm your selection. Select the appropriate daylight saving time zone using the

, and

buttons. If choosing EU or OTHERS, set the applicable conditions. The options are:

USA

: Applies the USA daylight saving time.

: Applies the EU daylight saving time. Select the GMT AREA and the time difference from standard time using the

, and

buttons.

OTHERS

: If the time zone is neither USA nor EU, set the BEGIN and END date and time of the daylight saving period using the

, and

buttons, then press the

SEL

button. Press the

ESC

button to return to SET DATE & TIME setup menu.

CAUTION

: Do not set the start time to 23:00 for DLS. DLS can’t be applied if the date of BEGIN and END is the same.

CLIENT ACCESS

Enable/Disable remote access through network client software.

BANDWIDTH

SAVING

Enable/Disable only key frame transmission. “ON” mode is recommended for use on low-bandwidth networks. Set to “OFF”

for normal use.

SEND EMAIL

Enable/disable the send email feature (ON/OFF).

TRANSMISSION MODE

: When an alarm is triggered, send an image of only the channel that triggered the alarm.

IP NOTIFICATION

: Enable/disable sending email when the IP address of your DVR is changed.

EVENT ALARM

: When an alarm is triggered, enable/disable sending email reports of the channel that triggered the alarm.

MAIL TO

: Use the virtual keyboard to enter the email address of the recipient.

MAIL SERVER

: Use the virtual keyboard to enter the mail server information.

: Use the virtual keyboard to specify the user ID for the mail server.

PASSWORD

: Use the virtual keyboard to specify the connection password for the mail server.

MAIL FROM

: Use the virtual keyboard to specify the email address sent to the destination host.

Содержание BLK-DH200400D










































































































Результаты поиска

Содержание BLK-DH200400D

Отзывы:

Похожие инструкции для BLK-DH200400D

Бренды по названию

Популярные бренды

Digiop BLK-DH200400D, Руководство пользователя

Результаты поиска

Содержание BLK-DH200400D

Отзывы:

Похожие инструкции для BLK-DH200400D

Бренды по названию

Популярные бренды