Setup Functions - Rotary Dimmer/Switch
3
A1: Dimmer has been powered up via mains 240Vac for LESS THAN 15 MINUTES
Step 1
Press and hold the dimmer rotary shaft for 10 seconds
Note: Connected lights will dim up or down, this is normal
Step 2
The white LED Indicators will blink ON/OFF twice per second. This indicates that
the dimmer is now in Setup Mode
Note: If more than one LEDsmart
+
device is connected in parallel, all these
devices will now enter setup mode. The blink ON/OFF will also be see on all other
LEDsmart
+
devices connected in parallel
Step 3
The dimmer is ready for the settings to be adjusted as required. Go to the
relevant setup function instructions
A2: Dimmer has been powered up via mains 240Vac for MORE THAN 15 MINUTES
Step 1
Press and hold the dimmer rotary shaft for 30 seconds
Note: This resets the Setup Entry time back to 10 seconds (for the next 30 minutes)
Note: Connected lights will dim up or down, this is normal
Step 2
The white LED Indicators will blink ON/OFF twice per second. This indicates that the
dimmer is now in Setup Mode
Note: If more than one LEDsmart
+
device is connected in parallel (see pages 5-7), all
these devices will now enter setup mode. The blink ON/OFF will also be see on all
other LEDsmart
+
devices connected in parallel
Step 3
The dimmer is ready for the settings to be adjusted as required. Go to the relevant
setup function instructions
