DNP530E_Quick Installation Guide_En_R1
w w w
.
d i g i m e r g e
.
c o m
Page 3
Hardware Installation - PoE Enabled Install
This camera is PoE enabled (built-in). The Ethernet
Cable provides both Network Connectivity and Power
if you use this installation option (PoE equipment will
be needed. See page 16 for details).
1. Mounting Instructions: Run the Ethernet cable to
the desired location.
• Mount the stand to the wall or Ceiling using the
provided screws.
• Securely connect the camera to the stand, and
set the desired angle.
2. Network: Connect the network cable to the
Camera Ethernet Cable (Port).
NOTE:
CAT-5 Ethernet Cabling has a maximum
effective range of 100m (330 ft.) depending on the
cable/switcher quality. For a longer run, a repeater
device may be required.
Hardware installation:
A. PoE Enabled Install
B. AC Powered Install
C. Optional Connections
HARDWARE CONNECTIONS
1
A
1
2
OPTION 1
OR
These cables should be protected, as they
are not rated for outdoor use. Alternatively,
a weatherproof Ethernet cable can be
connected internally.
