The last step in this demo is to generate and display the product of the two signal. Click on
“+Add Channel” button in the right hand side menu and choose “Custom”. This will add a
“Math1” menu (located under the Channel 2 menu) on the right hand side of the screen.
Configure the menu as shown below:
If “C1*C2” is not shown, click on that region of the menu. This will open a “signal calculator.”
Type C1*C2 in the top window of the calculator, as shown below. Then click “Apply.”
The AD2 scope will now display the two input signals and their product, as shown below.
