Digihertz Audio DA-TK250A Скачать руководство пользователя страница 2

 

 

1  

 

The lightning flash with arrowhead symbol within an 
equilateral is intended to alert the user to the presence of 
uninsulated dangerous voltage within the product’s 
enclosure, that may be of sufficient magnitude to 
constitute a risk of electric shock to people. 
 

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operation and maintenance (servicing) instruction in the 
literature accompanying the appliance. 

IMPORTANT SAFETY INSTRUCTION 

Please read all safety operation instructions before using this product. 
1.  This product must be earthed .If it should be malfunctioned or broken down, grounding provides a 

path of least resistance for electric current to reduce risk of electric shock. 

This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. 
This plug must be plugged into an appropriate outlet that is properly installed and earthed in 
accordance with all local codes and ordinance. 

2.  DANGER-Improper connection of the equipment-grounding conductor can result in a risk of electric 

shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is 
properly grounded. Do not modify the plug provided with the product-if it will not fit the outlet, have a 
proper outlet installed by a qualified electrician. 

3.    To reduce the risk of injury, close supervision is necessary when the product is used near children. 
4.    Do not use this product near water-for example, near a bathtub, washbowl, kitchen sink, in wet 

basement or near a swimming pool or the lake. 

5.    This product may be capable of producing sound levels that could cause permanent hearing loss and 

hearing damage. Do not operate for a long period of time at high volume level or at a level that is 
uncomfortable to your ear. If you experience any hearing loss or ringing in the ears, you should 

  consult an audiologist. 

6.    This product should be located to a location or position does not interfere with its proper ventilation. 
7.  This product should be located away from heat sources such as radiators, heat registers or other 

products that produce heat. 

8.  The product should be connected to a power supply only of to the type described on the operation 

instructions or as marked on the product. 

9.    This product may be equipped with a polarized line plug (one blade wider than the other).This is a safety 

feature. If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete 
outlet. Do not defeat the safety purpose of the plug. 

10. The power-supply cord of this product should be unplugged from the outlet when left unused. When 

unplugging the power-supply cord, do not pull on the cord, but grasp it by the plug. 

11. Caution should be taken so that object do not fall and liquid are not spilled into the enclosure through 

operation. 

12. This product should be serviced by qualified service personnel when: 

A. The power-supply cord or the plug has been damaged; or 

      B. Objects have been fallen, or liquid has been spilled into the product; or 
      C. The product has been exposed to rain; or 
      D. The product does not appear to operate normally or exhibits a marked change in performance; or 
      E. The product has been dropped or the enclosure damaged. 
13. Do not attempt to service the product beyond that described in the user-maintenance instructions. All 

other servicing should be referred to qualified service personnel. 

14. WARNING-Do not place object on the product’s power cord or place it in a position where anyone could 

trip over, walk on or roll anything over it. Do not allow the product to rest on or to be installed over power 
cords of any type. Improper installations of all above create the possibility of fire hazard and/or personal 
injury. 

SAVE THESE INSTRUCTIONS 

CAUTION 

RISK OF ELECTRIC SHOCK 

DO NOT OPEN 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC 

SHOCK DO NOT REMOVE COVER (OR BACK) 

NO USER-SERVICEABLE PARTS INSIDE REFER 

SERVICING TO QUALIFIED PERSONNEL 

Содержание DA-TK250A

























Отзывы: