Digigram VX222 v2, Руководство пользователя

Страница: 7 / 60

VX222
v2
User’s Manual
7
INFORMATION FOR THE INFORMATION FOR THE INFORMATION FOR THE INFORMATION FOR THE USER USER USER USER
This device complies with part
15
of FCC rules. Operation is subject to the
following two conditions: (
1
) This device may not cause harmful interference, and
(
2
) This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a CLASS B
digital device, pursuant to Part
15
of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions contained in this
data sheet, may cause harmful interference to radio and television communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
* reorient or relocate the receiving antenna
* increase the separation between the equipment and the receiver
* connect the equipment into an outlet on a circuit different from that of the
receiver
* consult the dealer or an experienced audio television technician.
NOTE NOTE NOTE NOTE:::: Connecting this device to peripheral devices that do not comply with CLASS B
requirements or using an unshielded peripheral data cable could also result in
harmful interference to radio or television reception. The user is cautioned
that any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. To ensure that the use of this product does not contribute to
interference, it is necessary to use shielded I/O cables.
IMPORTANT NOTICE IMPORTANT NOTICE IMPORTANT NOTICE IMPORTANT NOTICE
This card has been tested and found to comply with the following standards:
•
International: CISPR
22
Class B.
•
Europe: EMC
89
/
336
/CEE (
1992
) specifications.
•
United States: FCC Rules-Part
15
-Class B (digital device).
In order to guarantee compliance with the above standards in an installation, the
following must be done:
•
the provided cable must not be modified.
•
additional cables used must have their respective shield connected to each
extremity.