D i g i g r a m
10
Parameterizing the ASIO driver
To use the ASIO driver on your on chart PCX HR sound card, the option
“PCM only” has to be activated in the Digigram control panel (CPL). To
access this control panel, go to <Start>, <Programs>, <Digigram>,
<Digigram Control Center>.
Parameterizing the Wave driver
In the case of an application managing exclusively PCM audio, the latency of
the Wave driver can be optimized activating the option “PCM only” in the
Digigram control panel (CPL). With this option enabled, the latency of the
Wave driver is optimized (in this case the PCX HR on-board MPEG
encoding/decoding is disabled). To access this control panel, go to <Start>,
<Programs>, <Digigram>, <Digigram Control Center>.
