D i g i g r a m
8
Installation under Windows 2000 and XP
If the driver has been downloaded from our web site, it has to be expanded
prior to the driver’s installation as follows: double-click on the downloaded
file (self-expanding). You can use the default destination location (Windows
temporary folder) or select another directory.
•
Shut down your computer and insert your VX card.
•
Restart your computer.
•
Click on Cancel if the Found New Hardware Wizard appears.
•
Double-click on the setup.exe icon to launch the driver
installation.
•
A welcome message is displayed, click Next to continue.
•
The “License Agreement” window appears: read it, and click on
Yes to approve it. Do the same for the “Read Me First” window.
•
Choose the destination folder where Setup will install the
application files (..
\pcxnp
by default). Note that the driver files are
installed in ..
\windows\system32\Drivers\Digigram\PCXHR
. Click
Next.
•
In the “Select components” window make sure that the “Driver
for the HR boards” has been selected.
•
Check the drivers to be installed in addition to DirectSound and
Digigram np:
Wave
(MME), ASIO.
•
Select the program folder where the program icons will be added
(default: DIGIGRAM). Click Next.
•
Click Next to start copying the files.
•
Click on Continue anyway in the “Hardware installation”
window (Windows XP).
•
In the “Digigram drivers” window, select the number and the size
of buffers required by your applications. Click on Ok.
•
Click Finish to complete the driver installation.
Removing the driver under Windows 2000 and XP
•
Open the Windows Control Panel and double-click on the
Add/Remove Software icon.
•
Select “
Digigram HR Runtime …”
, and Change/Remove.
•
Select Remove in the np Runtime window.
•
Follow the instructions to finish driver removal.
