Digigram PCX880e, Руководство пользователя

Страница: 11 / 33

PCX880e,
​ ​
PCX881e
​ ​
&
​ ​
PCX882e
User
​ ​
manual
● a
​ ​
Wave
​​ ​​
driver
∗ ​ ​ ​
(32
​ ​
bits,
​ ​
installation
​ ​
optional)
5
● an ​ ​ ASIO ​ ​ driver ​ ​ (32 ​ ​ bits, ​ ​ installation ​ ​ optional)
Supported
​ ​
operating
​ ​
systems
PCX881e ​ ​ and ​ ​ PCX882e ​ ​ cards ​ ​ run ​ ​ under ​ ​ Windows ​ ​ XP, ​ ​ 2003 ​ ​ Server,
and ​ ​ following ​ ​ Windows ​ ​ versions
HARDWARE
​ ​
INSTALLATION
Due to the reduced length of the PCI EXPRESS bus connector and the
resulting lack of mechanical stability, we strongly advise against transporting
the card(s) installed in a computer, unless its chassis or case provides a
dedicated support to keep the card securely in place in order to avoid
physical
​ ​
damage.
The ​ ​ card ​ ​ has ​ ​ to ​ ​ be ​ ​ installed ​ ​ in ​ ​ the ​ ​ computer ​ ​ prior ​ ​ to ​ ​ installing ​ ​ its ​ ​ driver.
Installing
​ ​
the
​ ​
card
Gently plug the card in a free PCIe ​ ®
​
slot and press it down to position it
firmly. ​ ​ Tighten ​ ​ the ​ ​ screw.
Interrupt
​ ​
and
​ ​
memory
​ ​
address
Hardware interrupt and addresses are automatically set up at start-up
by ​ ​ the ​ ​ PCI ​ ​ PnP ​ ​ BIOS.
SOFTWARE
​ ​
INSTALLATION
Note: the installation of the software requires administrator rights
on ​ ​ your ​ ​ computer
Please visit the Digigram web site at ​ www.digigram.com ​ for the most
recent ​ ​ driver.
In case you run a specific application developed or installed by a
Digigram Partner, this application might require the use of a specific
driver version. In this case, make sure that the updated driver has
been
​ ​
approved
​ ​
by
​ ​
your
​ ​
supplier.
5
∗ ​
​ ​​
Windows
​ ​
XP
​ ​
and
​ ​
Server
​ ​
2003
​ ​
only
11