LoLa280
User manual
7
Software requirements
The LoLa280 requires installation of the drivers included in the LoLa Kit
version 1.03 or higher.
The LoLa Kit includes:
•
a WDM
DirectSound
driver
•
an ASIO driver
•
The Digigram LoLa Manager application allowing to control the
integrated mixer
OS supported
The LoLa280 runs under Windows XP, Windows Server 2003, Windows
Server 2008, and Windows Vista, and Windows 7.
HARDWARE INSTALLATION
Due to the reduced length of the PCI EXPRESS
TM
bus connector and the resulting
lack of mechanical stability, we strongly advise against transporting the card(s)
installed in a computer, unless its chassis or case provides a dedicated support to
keep the card securely in place in order to avoid physical damage.
The card has to be installed in the computer prior to installing its driver.
Installing the card
Gently plug the card in a free PCIe
®
slot and press it down to position it
firmly. Tighten the fastening screw of the bracket, or lock the card by means
of the mechanism provided for this purpose on your computer.
Interrupt and memory address
Hardware interrupt and addresses are automatically set up at start-up by the
PCI PnP BIOS.
SOFTWARE INSTALLATION
Note:
the installation of the software requires administrator rights on your
computer
Please visit the Digigram web site at www.digigram.com for the most recent
driver.
In case you run a specific application developed or installed by a Digigram
partner, it might require the use of a specific driver version. In this case, make
sure that the updated driver has been approved by your supplier.
