ES220 & ES220-L
Ethernet Audio Bridges
7
In order to guarantee compliance with the above standards in an installation, the
following must be done:
•
the provided cables must not be modified.
•
additional cables used must have their respective shield connected to each
extremity.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
* reorient or relocate the receiving antenna
* increase the separation between the equipment and the receiver
* connect the equipment into an outlet on a circuit different from that of the receiver
* consult the dealer or an experienced audio television technician.
Note:
Connecting this device to peripheral devices that do not comply with CLASS B
requirements or using an unshielded peripheral data cable could also result in
harmful interference to radio or television reception. The user is cautioned
that any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. To ensure that the use of this product does not contribute to
interference, it is necessary to use shielded I/O cables.
CONTENTS OF THIS PACKAGE
The ES2 package consists of the following components:
* one ES220 or one ES220-L 1/3 U rack device
* counterpart plug for the power connector
* the user’s manual at hand.
* a power supply (
optional
)
* an analog cable 2 inputs / 2 outputs (
optional with ES220
)
* an analog cable 2 outputs (
optional with ES220-L
)
* an analog cable 2 inputs (
optional with ES220-L
)
Also available for ES220 & ES220-L:
* 1U 19 inch rack to mount up to three ES220 or ES220-L
(
optional, including two blind panels and fastenings
)
* Mounting bracket for under-table fixing
(
optional, including fastenings
)
