DigiDesign Digi 001 страница 32 Скачать руководство пользователя | Manualshive

Страница: 32 / 82

background image

Digi 001 Quick Start Guide

28

Footswitch Jack

This connector allows you to connect a footswitch that can be used for control of
QuickPunch audio punch-in and punch-out features in Pro Tools LE, and for MIDI punch-
in and punch-out recording with Pro Tools LE. Both continuous on/continuous off and
instantaneous on/off pedals with a 1/4" TRS connector are supported. See “Recording with
a Footswitch” on page 72 for more information.

Monitor Inputs (Analog Inputs 3–4)

These connectors are used to connect analog audio sources 3–4, or to connect a stereo
source such as a CD player, synth, or cassette deck to monitor when using the Digi 001 I/O
Box in Monitor Mode. In Monitor Mode, input 3 is routed to the Left output and input 4
is routed to the Right output. These connectors are balanced, 1/4" TRS jacks.

Analog Inputs 3–8

These inputs are used to connect analog audio sources that are routed to Analog Inputs 3–8.
These are balanced, 1/4" TRS jacks for analog audio input connections. These analog inputs
feature 24-bit analog-to-digital converters.

Monitor Outputs

These outputs can be connected to powered speakers, a stereo power amp, or another
stereo destination to monitor your mix. The monitor outputs play the audio that is routed
to analog outputs 1 and 2. Analog output 1 material is routed to the left monitor output,
and analog output 2 material is routed to the right monitor output. These analog outputs
feature 24-bit digital-to-analog converters. You can control the output level of the monitor
outputs with the Monitor Volume control. These connectors are balanced, 1/4" TRS jacks.

Main Analog Outputs 1–2

These main outputs play the audio that is routed to analog outputs 1–2. These outputs can
provide left and right outputs to a tape deck for mixdowns, or to another stereo
destination. These analog outputs feature 24-bit digital-to-analog converters. These
outputs are balanced, +4 dBu line level. The connector type is 1/4" TRS.

Analog Outputs 3–8

These outputs play the audio that is routed to analog outputs 3–8. These analog outputs
feature 24-bit digital-to-analog converters. These outputs are unbalanced, –10 dBu line
level. The connector type is 1/4" TRS.

«
...
30
31
32
33
34
...
»

Содержание Digi 001



















































































Отзывы:

Нет отзывов

Похожие инструкции для Digi 001

Бренд: ABB Страницы: 11

Бренд: OMCA Страницы: 72

Бренд: Fender Страницы: 15

Бренд: J D Squared Страницы: 18

Бренд: Parker Страницы: 54

Бренд: THORLABS Страницы: 44

Бренд: Facsimile Страницы: 16

Бренд: Raven Страницы: 12

Бренд: Zero 88 Страницы: 20

Бренд: Kapriol Страницы: 32

Бренд: Cabletron Systems Страницы: 33

Бренд: i-CAT Страницы: 32

Бренд: jcb Страницы: 41

Бренд: Yetter Страницы: 24

Бренд: GE Страницы: 289

LED PowerBank 48

Бренд: SHOWTEC Страницы: 12

Бренд: Abus Страницы: 8

Бренд: Daekyung Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды