digicon dGate, Руководство по эксплуатации продукта

Страница: 13 / 32

Resistences of calculation must be reduced for distances from the edge and spacing smaller than
the critical values.
a) h: base material thickness
b) This is the maximum tightening torque recommended to avoid rupture through cracking during
installation for
fi xings with minimal distance from the edge and/or spacing.
5.4 Access to block dGate after assembly:
After the block dGate is installed and assembled, access to the interior of the
equipment can be done with the key that accompanies the equipment, in two ways:
Ÿ
Via the door that grants access to the electric panel;
Ÿ
Via the door that grants access to the engine or some accessory that is added, such
as the collecting box kit.
13
Locks
Electric panel door
Access door to
engine and accessories
Additional panel
for assembly of
inegrator ’ s access
controller
230x350mm
Additional panel
for assemblyof
(optional) or MCA
for the integrator ’ s
access controller
180x205mm