Digicom VoiceGate ATA, Руководство пользователя

Страница: 24 / 90

SIP Service Provider
Active First you need click On to enable the Service Domain, then you can input
the following items:
Domain Server For example, in test@domain.com, the domain is “domain.com”. Provided
by your VoIP Service Provider.
Proxy Server If your VoIP service provider has an proxy address and requires that you
provide the address to VoIP Gateway. For the address enter a domain name
(for example, domain.com) or an IP address (for example,
123.456.789.012).
Outbound Proxy If your VoIP service provider has an outbound proxy address and
requires that you provide the address to VoIP Gateway. For the address
enter a domain name (for example, domain.com) or an IP address (for
example, 123.456.789.012).
Display Name This name is displayed in the VoIP Gateway display.
Other parties will see this name they are when connected to you.
User Name Typically the account number for the SIP account.
For example, in test@domain.com, the user name is “test”.
Provided by your VoIP Service Provider.
Register Name May not be required.
If it is required, it will be provided by your VoIP Service Provider.
Register Password Provided by the VoIP Service Provider.
Subscribe for MWI When set to On a Subscribe for Message Waiting Indication will be
sent periodically.
Register Status You can see the Register Status in the Status item. If the item shows
“Registered” , then your VoIP Gateway is registered to the ISP, you can
make a phone call directly.
Submit Button When you finished the setting, please click the Submit button.
Reset Button You can reset the configured parameters before you submit
Back Button Go back to the previous web page
4.2.3.1.2 Port Setting
You can setup the SIP and RTP port number in this page. Each ISP provider will have different SIP/RTP
port setting, please refer to the ISP to setup the port number correctly. When you complete the setting, please
click the Submit button.