3.8
Description
Q
Returns code
Enable or disable the return codes from Tintoretto to the Computer.
Q0
Messages transmission enabled
Q1
Messages transmission disabled
Q3
Reserved
Q4
Reserved
Q5
Reserved
Store: S14 (bit 0,2,4) S52 (bit 0)
Default= Q0
S
S Registers
Show and change the contect of "r" register
Sr=xxx
Store the number xxx, in hexadecimal digit, in the “r” register (from 0 to 255).
Sr?
Display the value of "r" register (from 0 to 255)
Store: n/a
Default= n/a
V
Numeric and Verbose Messages
Select the type of the return code from Tintoretto to the Computer. Can be selected the numeric
mode to manage Tintoretto by a PC and the verbose mode to manage Tintoretto by an operator.
Using the numeric mode the return codes are followed by the <CR> char.
Using the verbose mode the return code are preceded and followed by the <CR> and <LF>
character.
V0
Return codes displayed in numeric mode
V1
Return codes displayed in verbose mode
Store: S14 (bit 3)
Default= V1
X
Select Return Codes
X
Select the return code types
X0
Enable return codes from 0 to 4
X1
Enable all return codes
X2
For compatibility only
X3
For compatibility only
X4
For compatibility only
Store: S24 (bit 3) S22 (bit 4, 5, 6)
Default=X1
Following the table including all the result messages in numeric and verbose mode:
Содержание Tintoretto
Страница 1: ...TINTORETTO USER S MANUAL Cod 7D1109 rev 1 0 02 98...
Страница 2: ...http www digicom it...
