Digicom 3G Corporate DG 11, Руководство пользователя, Страница: 59 / 68

5.39
3G Router Configuration
The configuration page is divided into three parts: Status, Input and Output.
Status
By pressing “Update” the input and output status will be tested and displayed.
Input
Stand by
It defines if it applies or not the rules defined in this configuration page.
It enables/disable this option. It enables as soon as “Apply” is selected.
To save the desired setting you must choose “Commit” in the Save & Reboot menu.
Default It allows to configure the default input status.
At an inpust status change it will be possible to define the actions to be enabled: Data Connection and/or Send SMS.
Two possible situations are defined:
1) The input moves from the default status (Open/Close) to a new one (opposite situation to default)
2) It restores the default status.
Data Connection It defines after which input status change a data connection must be enabled. For the 3G connection it
will be used the “Disconnect timeout (s)” present in the
Remote Activation
menu (Configuration\WAN\3G
UMTS). See also Security\ Disconnect timeout.
Send SMS
It defines after which input status change it must send an SMS to communicate the event. In the Text field
you define the message to be sent and by selecting the “+IP” item, the public IP address of 3G Router
will be automatically added in the message. This option is useful in case the Internet network (3G/ADSL)
assignes a dynamic IP address.
SMS Number
It allows the configuration of at least two phone numbers to which the notification SMS of status change
is sent. (Send SMS configuration).
Output
It allows to modify the output status. The factory default is Open. To close the output you must select Close and confirm with Apply
(the ststus change will be immediate). If you want the new status (i.e. Close) is used as default value by 3G Router (to be kept also
in case the device is powered off and on again) choose “Commit” in the Save & Reboot menu.
Reset
By pressing Reset you will perform a status change for the time set in Reset time (s).