background image

DQ & MQ-Rack User Guide 

1.1 Introduction

  

 

 

 

 

 

4

 

 

Licence Agreement 

"

Product

": SD software product produced by Digico UK Ltd intended for use on Target Platform identified below. 

"

Target Platform

": Digico SD Digital Console systems. 

In return for the payment of the one-time fee, the Customer (identified at the end of this Agreement) receives from Digico UK Ltd a licence to use the 
Product subject to the following terms and conditions. 

1. The Product may be used without time limit by the Customer on the Target Platform. 

2. The Customer must register the Product with Digico UK Ltd. Registering the Product is deemed an acceptance of the terms and conditions in this 
agreement. 

3. The Product and its licence are not transferable, and the Customer is not permitted to onward-license to any third party. The Customer indemnifies 
Digico UK Ltd against any and all claims and actions arising from third party use of copies of the Product made by the Customer. 

4. The Customer agrees not to attempt to decompile the object code of the Product otherwise than in circumstances specifically provided for by law, 
and then only after consultation with Digico UK Ltd. 

5. The Customer agrees not to use, or licence the Product for use, with equipment other than the Target Platform. 

6. The Customer agrees not to modify the Product without the prior written consent of Digico UK Ltd. 

7. This Agreement applies to any enhancement or upgrades that may become available for the Product. 

8. This Agreement does not transfer any right, title, or interest in the Product to Customer except as specifically set forth herein. 

9. Digico UK Ltd reserves the right to terminate this Agreement upon breach, in which event Customer shall thereafter only be authorised to use the 
Product to the extent that its contractual commitments to third parties require and then only where such commitments relate to use of the Product as 
authorised in the foregoing provisions of the Agreement. 

LIMITED WARRANTY 

- Digico UK Ltd warrants for a period of 1 year from the date of purchase of the Product, the Product will reasonably execute its 

programming instructions when properly installed on the Target Platform. In the event that this Product fails to execute its programming instructions 
during the warranty period, the Customer's remedy shall be to return the Product to Digico UK Ltd for replacement or repair at Digico UK Ltd option. 
Digico UK Ltd makes no other express warranty, whether written or oral with respect of this Product. 

LIMITATION OF LIABILITY 

- Except as otherwise expressly provided by law, (a) the remedies provided above are the Customer's sole and exclusive 

remedies and (b) Digico UK Ltd shall not be liable for any direct, indirect, special, incidental, or consequential damages (including lost profit whether 
based on warranty, contract, tort, or any other legal theory.) 

This agreement is made under the Laws of England. 

 

LICENCE NO: .................................................................................................................................................. 

 

REGISTRATION DATE: 
.................................................................................................................................................. 

Содержание DQ-Rack
























Отзывы: