Configure XBee Industrial Gateway
Mobile Connectivity settings
Digi XBee Industrial Gateway
99
6.
For the web interface only
: Go to the
Administration
>
Mobile Status
page to view the
mobile status information. You can refresh the page to see the latest status information.
The device should now be able to connect to the mobile network. The status fields on the
Administration
>
Mobile Status
fields will change to reflect the connectivity status.
n
If the device successfully connects to the networks, two key connectivity status fields
appear as follows:
SIM Pin State: READY
and
Connection state: Connected
.
n
If the device does not connect to the network, you do not see
SIM Pin State
on the
Mobile Status
page, and/or the
Connection state
field has a value other than
Connected
, additional setup and troubleshooting is necessary. See
XBee Industrial Gateway GSM and LTE devices
.
Configure mobile settings
To configure mobile settings, choose one of the following options:
From Remote Manager
1. Click the
Device Management
tab.
2. From the device list, double-click the device to display the device properties menu.
3. Click
Mobile
. The mobile connectivity settings identify the service provider to use when
connecting to the mobile network. Some values may be hidden, depending on your model.
4.
and click
Save
to save your changes.
From the XBee Industrial Gateway web interface
1. From the XBee Industrial Gateway web interface, click the
Mobile Connectivity
under
Configuration
. The
Mobile Connectivity
settings identify the service provider to use when
connecting to the mobile network. Some values may be hidden, depending on your model.
2.
and click
Apply
to save your changes.
Mobile Configuration page
The Mobile settings on the
Mobile
page identify the service provider to use when connecting to the
mobile network.
n
DNS server set by network
: Select this option when you want to use the DNS server set by
the network.
n
Username
: The user name of the mobile connection needed to access the mobile network.
Depending on mobile service provider, this value may not be necessary.
n
Password
: The password of the mobile connection needed to access the mobile network.
Depending on mobile service provider, this value may not be necessary.
n
Access Point Name (APN)
: The service plan or access point name (APN).
n
SIM PIN
: A password that allows an administrator of the device to access information on the
SIM card. The password is usually between four and eight digits. SIM PINs act like ATM PINs in
that they require users to authenticate themselves as the true owner of the card before
information is released. Depending on mobile service provider, this value may not be necessary.
Содержание XGI-20CZ7-E00-W0
Страница 1: ...Digi XBee Industrial Gateway User Guide...
