Digi XGI-20CZ7-E00-W0, Руководство пользователя

Страница: 24 / 153

XBee Industrial Gateway hardware XBee Industrial Gateway LED descriptions
Digi XBee Industrial Gateway 24
Network LED
Note The Network LED remains dark during the initial boot of the device. All diagnosis related to this
LED must be done after the device has been running for at least 60 seconds.
LED
Color and blink
pattern
Description
OFF XBee Industrial Gateway operating system is not yet
running.
Blinking yellow,
slow Operating system is running, but no network link is
established or IP address assigned.
Solid yellow An IP address has been assigned to XBee Industrial
Gateway.
Blinking yellow -
fast (1 blink per
second)
A network issue has occurred. The two most common
Remote Manager connectivity-related reasons for this
state are:
1. XBee Industrial Gateway cannot connect to a DNS
server to resolve the Remote Manager server
address. See Cannot connect to DNS server to
resolve the Remote Manager server address .
2. XBee Industrial Gateway cannot connect to an NTP
time server to get the correct time. See Cannot
connect to NTP time server to get correct time .
Solid yellow to
blinking green XBee Industrial Gateway is attempting a connection to a
Remote Manager server.
Blinking green - fast
(1 blink per second)
Remote Manager server found and XBee Industrial
Gateway is undergoing authentication.
Solid green XBee Industrial Gateway is connected to the Remote
Manager server.
XBee LED
The XBee LED indicates the network connection status of the XBee RF module in XBee Industrial
Gateway to a ZigBee wireless network. At startup, if you are not yet deploying your device in a ZigBee
network, you can ignore this LED and its states. Once XBee Industrial Gateway is deployed in a ZigBee
network, the XBee LED behavior varies depending on whether XBee Industrial Gateway acts as a