Digi Wi-Point 3G Application Guide
– Linksys VPN Connection
2/20/2009
Digi International
2 of 6
Digi Wi-Point 3G Configuration
1.
Read and follow the quick-start guide for the Digi Wi-Point 3G. A link has been
provided:
http://ftp1.digi.com/support/documentation/90000907_a.pdf
2.
Assign a static IP address to the Ethernet port (the default address is 192.168.1.1).
Note the default gateway may show or change to an address such as 10.6.6.6. This is
normal as it is the cellular provider’s network default gateway.
3.
Configure the Digi Wi-Point 3G settings:
a.
Navigate to
Configuration > Network > Virtual Private Network (VPN)
Settings
in the web interface of the unit.
b.
Ensure that button for
Enabled
is checked. If not, enable this feature and
Apply
the setting.
c.
Click
VPN Tunnel Settings
i.
Click the
Add
button to start creating the tunnel
ii.
Fill in the appropriate information, shown in the following
screenshots: