Digi Transport WR41-C Скачать руководство пользователя страница 2

WR41 Series Installation Guide 

Safety Notices 

1)  Please read all instructions before installing and powering the unit. You should keep 

these instructions in a safe place for future reference. 

2)  The WR41 range uses a 5VDC/3A power supply (mains adapter). If the mains 

adapter shows signs of damage or malfunction, you should stop using it immediately, 
turn off the power at the mains and disconnect it from the mains supply before 
contacting your supplier for a repair or replacement. 

3)  Changes or modifications not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment. Use only the 
accessories, attachments, and power supplies provided by the manufacturer – 
connecting non-approved antennas or power supplies may damage the unit, cause 
interference or create an electric shock hazard, and will void your warranty. 

4)  Do not attempt to repair the product. The unit contains no electronic components that 

can be serviced or replaced by the user. Any attempt to service or repair the unit by 
the user will void the product warranty. 

5)  Products in the WR41 range are designed for indoor use only and should be used in 

an environment that is suitable for computers and other electronic equipment. 

6)  Ports that are capable of connecting to other apparatus are defined as SELV ports. 

To ensure conformity with IEC60950-1 ensure that these ports are only connected to 
ports of the same type on other apparatus. 

Wireless Networks 

The wireless networks supported by the WR41 series routers fall into three categories: 

 

GSM networks (GPRS, EDGE) 

 WCDMA 

networks 

(UMTS, HSDPA, HSUPA ) 

 

CDMA450 networks (EVDO 1xRTT) 

The type of network supported by each model is summarised in the table below: 

 

 

Network 

 

Model 

GSM 

GPRS 

GSM 

EDGE 

WCDMA 

UMTS 

WCDMA 

HSDPA 

WCDMA 

HSUPA 

CDMA450 

EVDO1xRTT 

WR41-G 

 

 

 

 

 

WR41-E 

 

 

 

 

 

WR41-H 

 

 

 

 

 

WR41-U 

 

 

 

 

 

WR41-C 

 

 

 

 

 

WR41 Series Installation Guide 

Special notes on safety for wireless routers. 

Digi International products are designed to the highest standards of safety and 
international standards compliance for the markets in which they are sold. However, GSM 
based products contain radio devices which require specific consideration. Please take 
the time to read and understand the following guidance. Digi International assumes no 
liability for an end user’s failure to comply with these precautions. 

 

Wireless routers incorporate a wireless radio module. Users should 
ensure that the antenna(s) is (are) positioned at least 1 metre away from 
themselves and other persons in normal operation. 

When in a hospital or other health care facility, observe the restrictions on 
the use of mobile phones. Do not use the router in areas where 
guidelines posted in sensitive areas instruct users to switch off mobile 
phones. Medical equipment may be sensitive to RF energy. 

The operation of cardiac pacemakers, other implanted medical 
equipment and hearing aids can be affected by interference from cellular 
terminals such as the wireless routers when placed close to the device. If 
in doubt about potential danger, contact the physician or the 
manufacturer of the device to verify that the equipment is properly 
shielded. Pacemaker patients are advised to keep the wireless router 
away from the pacemaker while it is on. 

 

Wireless routers must NOT be operated on aircraft. The operation of 
wireless appliances in an aircraft is forbidden to prevent interference with 
communications systems. Failure to observe these instructions may lead 
to the suspension or denial of cellular services to the offender, legal 
action, or both. 

 

As with any electrical equipment, you should not operate your wireless 
router in the presence of flammable gases, fumes or potentially explosive 
atmospheres. Radio devices should not be used anywhere that blasting 
operations are taking place. 

 

Wireless routers receive and transmit radio frequency energy while 
switched on. Remember that interference can occur if it is used close to 
TV sets, radios, computers or inadequately shielded equipment. Follow 
any special regulations and always switch off your wireless router 
wherever forbidden or when you suspect that it may cause interference 
or danger. 

 

SOS IMPORTANT! – Wireless routers operate using radio signals and 
cellular networks cannot be guaranteed to connect in all possible 
conditions. Therefore, you should never rely solely upon any wireless 
device for life critical communications. 

Содержание Transport WR41-C








Отзывы: