Digi TransPort WR31 Скачать руководство пользователя страница 2

TransPort WR31 Analog and Digital Input/Output Interface User Guide

2

TransPort WR31 Analog and Digital Input/Output Interface User Guide

90001489

Product documentation

To find the most up-to-date documentation for all Digi products, visit 

www.digi.com/resources/documentation

.

Trademarks and copyrights

TransPort, Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and 

other countries worldwide. All other trademarks mentioned in this document are the property of their respective 

owners.

© 2015 Digi International. All rights reserved.

Disclaimers

Information in this document is subject to change without notice and does not represent a commitment on the part 

of Digi International. Digi provides this document “as is,” without warranty of any kind, expressed or implied, 

including, but not limited to, the implied warranties of fitness or merchantability for a particular purpose. Digi may 

make improvements and/or changes in this manual or in the product(s) and/or the program(s) described in this 

manual at any time.

Warranty

View the product warranties online: 

http://www.digi.com/howtobuy/terms

Customer support

If you need assistance, contact Digi Technical Support:

Telephone (8:00 am — 5:00 pm U.S. Central Time):

866.912.3444 toll-free U.S.A. and Canada
+1 952.912.3456  Worldwide

Online: 

www.digi.com/support/eservice

Mail:

Digi International
11001 Bren Road East
Minnetonka, MN 55343
US

Revision Date

Description

A

December 2015

Initial release.

Содержание TransPort WR31










Отзывы: