Digi MIL-S3120, Руководство по установке

Страница: 5 / 6

5
You can try to correct the interference by one or more
of the following measures:
!
Plug the computer which has the equipment
installed into a different power outlet so that the
equipment and the receiver are on different branch
circuits.
!
Reorient the receiving radio or TV antenna where
this may be done safely.
!
If necessary, you should consult the place of
purchase or an experienced radio/television
technician for additional suggestions.
S
AFETY INSTRUTIONS
1. This product should be operated from the type of
power source indicated on the marking label. If you
are not sure of the type of power available, consult
your dealer or local power company.
2. This product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin. This plug will only fit into a
grounding type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the purpose of the grounding
type plug.
3. Do not allow anything to rest on the power cord. Do
not locate this product where persons will walk on
the cord.
4. If an extension cord is used with this product, make
sure that the total ampere ratings on the products
plugged into the extension cord do not exceed the
extension cord ampere rating. Also make sure that
the total of all products plugged into the wall outlet
does not exceed 15 amperes.
5. Never push objects of any kind into this product
through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a
risk of fire or electric shock. Never spill liquid of
any kind on the product.
6. Do not attempt to service this product yourself, as
opening or removing covers may expose you to
dangerous voltage points or other risks. Refer all
servicing to servicing to service personnel’s.
T
ECHNICAL INFORMATION
Standards Compatibility
ISO/IEC 802.2-3
IEEE 802.3
IEEE 802.3u
Interfaces
RJ-45 fully shielded connector for 10Base-T and
100Base-TX Fast Ethernet
Physical
8-port 10/100 Dual Speed Switch
Width 219mm (8.62 in.)
Height 26mm (1.02 in.)
Depth 101mm (3.98 in.)
Weight 0.8 kg (1.76 lb.)
4-port 10/100 Dual Speed Switch
Width 158mm (6.22 in.)
Height 26mm (1.02 in.)
Depth 101mm (3.98 in.)
Weight 0.6 kg (1.32 lb.)
8-port 10/100 Dual Speed Switch
Input Voltage 120 VAC @ 60Hz
or 230 VAC @ 50Hz
Output Voltage 12VDC @ 1.2A
Power consumption 11.2 W
4-port 10/100 Dual Speed Switch
Input Voltage 120VAC @ 60Hz
or 230VAC @ 50Hz
Output Voltage 12VDC @ 1.2A
Power consumption 8W
Environmental Specifications
Operating temperature 0
°
to 40
°
C
Storage temperature -20
°
to 70
°
C
Operating Humidity 10% to 90% RH
Storage Humidity 10% to 95% RH
Electromagnetic Emission
FCC Class A, CE Class A, VCCI Class A
Safety Approval
UL/CUL, TUV