Chapter 2
MIL-3200X Series of FastPort Print Servers
2-5
I
N
S
T
A
L
L
A
T
I
O
N
Figure 2-2. MIL-3210X Rear Panel of FastPort
The unit performs POST (power-on self-test) at start-up and
tries to resolve its IP addresses.
• If the IP address is set, the
SYS
LED blinks once per second.
• If the IP address is not set, the
SYS
LED blinks five times
per second until the address is set either manually or by
using
RARP
,
BOOTP
, or
DHCP
.
FastPort should now be functioning on the network. Consult
the
FastPort User’s Guide
to continue the installation on a
specific client computer.
UTP
16VAC
PWR
SYS
NET LNK
MIL•4320M
CX
PW
FT
RX
