Digi IX10, Руководство пользователя

Страница: 376 / 874

Virtual Private Networks (VPN) L2TP
IX10 User Guide 376
ii. Set the zone:
(config vpn l2tp lns lns_server)> zone zone
(config vpn l2tp lns lns_server)>
h. (Optional): Custom PPP configuration:
i. Enable custom PPP configuration:
(config vpn l2tp lac lns lns_server)> custom enable true
(config vpn l2tp lns lns_server)>
ii. Enable overriding, if the custom configuration should override the default
configuration and only use the custom options:
(config vpn l2tp lns lns_server)> custom override true
(config vpn l2tp lns lns_server)>
iii. Paste or type the configuration data in the format of a pppd options file:
(config vpn l2tp lns lns_server)> custom config_file data
(config vpn l2tp lns lns_server)>
7. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
8. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Configure SureLink active recovery for PPP-over-L2TP
You can configure the IX10 device to regularly probe PPP-over-L2TP access concatenators to
determine if the connection has failed and take remedial action.
Required configuration items
n
A valid PPP-over-L2TP configuration. See Configure a PPP-over-L2TP tunnel for configuration
instructions.
n
Enable PPP-over-L2TP active recovery.
n
The behavior of the IX10 device upon PPP-over-L2TP failure: either
l
Restart the PPP-over-L2TP interface
l
Reboot the device.
Additional configuration items
n
The interval between connectivity tests.
n
Whether the interface should be considered to have failed if one of the test targets fails, or all
of the test targets fail.