Regulatory information
Edgeport USB Expansion Modules Installation Guide
28
Changes or modifications to this equipment not expressly approved by Digi may void the user’s
authority to operate this equipment.
Industry Canada
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables
aux appareils numeriques de la class B prescrites dans le Reglement sur le brouillage radioelectrique
edicte par le ministere des Communications du Canada.
Europe
For OEM labeling, the "CE" mark must be affixed to a visible location on the OEM product. The
following figure shows CE labeling requirements.
The CE mark shall consist of the initials “CE” taking the following form:
n
If the CE marking is reduced or enlarged, the proportions given in the above graduated
drawing must be respected.
n
The CE marking must have a height of at least 5 mm except where this is not possible on
account of the nature of the apparatus.
n
The CE marking must be affixed visibly, legibly, and indelibly.
Conforms to the relevant EU Directives listed here:
If the Edgeport® USB is incorporated into a product, the manufacturer must ensure compliance of the
final product with articles 3.1a and 3.1b of the RE Directive (Radio Equipment Directive).
Declaration of Conformity (DoC)
Digi has issued Declarations of Conformity for the Digi Edgeport products concerning emissions,
EMC, and safety.
