Cautions and warnings
Digi Connect ES Device Server Hardware setup guide
8
Cautions and warnings
CAUTION!
• Do not rely on the validity of the data from this device server without validating the integrity of
the entire information collection system.
• This product uses Double Pole/Neutral fusing. For continued protection against risk of fire,
return the unit to the factory for fuse replacement.
• The facility staff where this equipment is installed is responsible to ensure that this equipment
and the equipment it is connected to are safe, functional, and properly configured for their
environment and intended use. Devices and equipment must be installed, inspected, and
maintained in accordance with this guide.
• It is the responsibility of the system integrator or facility staff to verify data stream integrity
periodically.
• Connect ES should be periodically cleaned.
• When cleaning or disinfecting the device, power to the device must be turned off and the
power disconnected.
• Clean and disinfect the device periodically by wiping the outer case with a lint-free cloth,
lightly moistened with warm water and a mild, non-abrasive cleaning solution or 70%
isopropyl alcohol.
• Do not use excessive pressure when wiping.
• Do not sterilize the device server.
Package recycling information
QTY
Quantity
REV
Revision number
Serial number
Temperature limitation
Warning
WEEE
Device was put on the market after 13 August 2005. Conforms to the
Directive 2003/108/EC on waste electrical and electronic equipment (WEEE)
of the European Parliament.
Symbol
Definition