Regulatory information
Maximum power and frequency specifications
ConnectCore 6UL SBC Pro Hardware Reference Manual
53
Maximum power and frequency specifications
Note
The following maximum power and frequency values are for the ConnectCore 6UL system-on-
module.
Maximum
power
Frequencies
63.1 mW
13 overlapping channels each 22 MHz wide and spaced at 5 MHz. Centered at
2.412 to 2.472 MHz.
31.62 mW
165 overlapping channels each 22 or 40 MHz wide and spaced at 5 MHz. Centered
at 5180 to 5825 MHz.
Europe
Declarations of Conformity
Digi has issued Declarations of Conformity for the ConnectCore 6UL SBC Pro concerning emissions,
EMC, and safety. For more information, see
http://www.digi.com/resources/certifications
Important note
Digi customers assume full responsibility for learning and meeting the required guidelines for each
country in their distribution market. Refer to the radio regulatory agency in the desired countries of
operation for more information.
CE mark
The ConnectCore 6UL SBC Pro is certified for use in several European countries. For information, visit
www.digi.com/resources/certifications
If the ConnectCore 6UL SBC Pro is incorporated into a product, the manufacturer must ensure
compliance of the final product with articles 3.1a and 3.1b of the RE Directive (Radio Equipment
Directive). A Declaration of Conformity must be issued for each of these standards and kept on file as
described in the RE Directive (Radio Equipment Directive).
Furthermore, the manufacturer must maintain a copy of the ConnectCore 6UL SBC Pro user manual
documentation and ensure the final product does not exceed the specified power ratings, antenna
specifications, and/or installation requirements as specified in the user manual. If any of these
specifications are exceeded in the final product, a submission must be made to a notified body for
compliance testing to all required standards.
OEM labeling requirements
The CE marking must be affixed to a visible location on the OEM product.
