Update the modem firmware over the air (FOTA)
Step 4: Verify that the update was successful
Digi Connect® Sensor Telit Modem Firmware Update - Verizon
10
Note
All devices in the request must have the same modem revision and update string. Devices will
individually connect as scheduled and perform the update.
See the
Digi Remote Manager User Guide
and
Digi Remote Manager Programming Guide
on the
Remote
Manager Documentation
tab for more information.
Step 4: Verify that the update was successful
1. In Remote Manager, click on the
Device Management
tab.
2. Display the device properties.
3. Click
Refresh
at the bottom of the device page.
Click
Yes
if prompted to send as an offline operation.
The information will update the next time the device is scheduled to connect to the Remote
Manager.
4. Close the
Device
tab.
5. Re-open the device tab by double-clicking on your device.
6. Select
System Information > Mobile information
.
7. Note the new value for
Revision
, which should now be 20.00.015.
