7
Symbols and Annunciators
Continuity
BAT Low battery
Diode
AC
Alternating Current or Voltage
DC Direct Current or Voltage
HOLD Data HOLD (model 20250-51)
AUTO Autoranging (model 20250-51)
Setup and Operation
WARNING: Risk of electrocution. High-voltage circuits,
both AC and DC, are very dangerous and should be
measured with great care.
1. ALWAYS turn the rotary function switch to the OFF
position when the meter is not in use. This meter has
Auto Power-Off that automatically shuts the meter OFF
if 15 minutes elapse between uses.
2. If “OL” appears in the display during a measurement,
the value exceeds the range you have selected. Change
to a higher range.
NOTE: On some low AC and DC voltage ranges, with the
test leads not connected to a device, the display may show
a random, changing reading. This is normal and is caused
by the high-input sensitivity. The reading will stabilize and
give a proper measurement when connected to a circuit.
1065DGMAN_20250-50, -51 Digi-Sense Compact Multimeter.indd 7
8/15/2017 8:23:18 AM
