6
“Real-time” Operating Mode:
Allows you to monitor and log the mea-
sured data in real time while the logger is
still plugged into the computer USB port.
Set the
Sample rate(s)
, the
Max
number of
data samples, and the
Temperature Unit
to your desired settings. The
Humidity
Unit
(RH models only) is preset as %RH.
Click the Setup button to approve the
settings.
In the “Real-time” mode, the logger only
has an immediate start mode which is initi-
ated by clicking on the clock icon in the
upper left of the display screen.
After a few seconds, the real-time tem-
perature and RH readings measured by the
logger will show in the upper left quadrant
of the display and the logged data will show
in the lower left sector of the screen. The
graphic display will show the measured
temperature trend.
Data in the real-time mode will continue
to collect and display until the number of
samples selected is logged.
Software Setup and Operation (continued)
➞
➞
➞
www.
.com
1.800.561.8187
