23
CHANGING THE OIL
1. Lay the drive unit flat on the
ground with the oil fill bung
facing up. Using an 8mm Allen
key remove the bung
2. Rotate the unit until the oil
fill hole is sitting at the bottom
and drain all the oil.
NOTE: If your unit is leaking oil after you
have performed the daily checks consult
your local authorised service agent
3. Rotate the unit until the oil
fill hole is sitting between
60º - 70º from horizontal.
Add oil until it reaches the fill
hole. Never completely fill the
gearbox with oil. Ensure the
drive is tilted 60º when filling.
60º
USE QUALITY EXTREME
PRESSURE GEAR OIL
(EP ISO 320 GRADE - SYNTHETIC OIL)
NOTE
