
OPERATING INSTRUCTIONS
STORAGE
•
Clean the unit thoroughly, removing all mud, dirt, and grease.
•
Inspect for visible signs of wear, breakage, or damage. Order any parts required and make the
necessary repairs to avoid delays upon removal from storage.
•
Tighten loose nuts, cap screws and hydraulic connections.
•
Coat exposed portions of the cylinder rods with grease.
•
Lubricate grease fittings.
•
Seal hydraulic system from contaminants and secure all hydraulic hoses off the ground to help
prevent damage.
•
Replace decals that are damaged or in unreadable condition.
•
Store unit in a dry and protected place. Leaving the unit outside will materially shorten its live.
Additional Precautions for Long Term Storage:
•
Touch up all unpainted surfaces with paint to prevent rust.
REMOVAL FROM STORAGE
•
Remove cover.
•
Wash unit and replace any damaged and/or missing parts.
•
Lubricate grease fittings.
•
Check hydraulic hoses for damage and replace as necessary.
LIFT POINTS
Lifting points are identified by lifting decals where required. Lifting at other points is unsafe and can
damage attachment. Do not attach lifting accessories around cylinders or in any way that may
damage hoses or hydraulic components. See Diagram
•
Attach lifting accessories to unit at recommended lifting points.
•
Bring lifting accessories together to a central lifting point.
•
Lift gradually, maintaining the equilibrium of the unit.
PM-000068-A DECEMBER 2017
20
Содержание HP450
Страница 1: ...OPERATOR S MANUAL HP450 HP600 ROAD PROFILERS FOR SKID STEER LOADERS PM 000068 A DECEMBER 2017...
Страница 2: ...THIS PAGE IS INTENTIONALLY BLANK PM 000068 A DECEMBER 2017...
Страница 4: ...THIS PAGE IS INTENTIONALLY BLANK PM 000068 A DECEMBER 2017 2...
Страница 36: ...THIS PAGE IS INTENTIONALLY BLANK PM 000068 A DECEMBER 2017 34...