6
Product Manual: Cement Mixa - June 2009
5 MainTenance
The key feature of your Digga Cement Mixa is low maintenance. It contains no user serviceable parts, unauthorised disassembly will
void warranty
●
Make sure that all nuts and bolts are in place and properly tightened.
●
Make sure that all other fasteners are in place and are performing their specified function.
●
Make sure that all hydraulic fittings are tightened and that there are no leaks in any fittings or hoses.
●
Make sure that all safety signs are in place, are clean, and are legible. (SEE THE SAFETY SIGN SECTION)
●
Check for any Oil leaks
●
Wear and tear on Pins, linkages, clips
●
Replace any damaged parts and excessively worn parts.
●
Use only manufacturer recommended replacement parts. Other parts may be substandard in fit and quality.
●
Always wear safety goggles or glasses when inspecting equipment
SAFETY FIRST!! READ AND uNDERSTAND THE SAFETY INSTRuCTIONS
BEFORE BEGINNING ANY DRIVE uNIT MAINTENANCE
BEFORE FIRST USE
BEFORE EACH USE
●
Inspect the attachment for shipping damage. If damage does exist, do not operate until the damaged parts have been replaced
or repaired.
●
Oil needs to be changed after 12 months or 1000 hours then every 2 years there after. Oil changes must be performed by an
Authorised Service Agent. Please Contact Digga for your nearest service location
EVERY 12 MONTHS
Escaping fluid under pressure can have
sufficient force to penetrate the skin
causing serious personal injury. Fluid
escaping from a very small hole can be almost
invisible. use a piece of cardboard or wood,
rather than hands to search for suspected
leaks. keep unprotected body parts, such as
face, eyes, and arms as far away as
possible from a suspected leak. Flesh
injected with hydraulic fluid may develop
gangrene or other permanent disabilities.
If injured by injected fluid, see a doctor at
once. If your doctor is not familiar with this
type of injury, ask him to research it
immediately to determine proper treatment.
WARNING!
CARDBOARD
HYDRAULIC HOSE
OR FITTING
MAGNIFYING GLASS
Always wear safety goggles or glasses when inspecting equipment
