manualshive.com logo in svg

Digalog Systems 2040D Series, Руководство по обслуживанию

Поделиться
Скачать
Digalog Systems 2040D Series Скачать руководство пользователя страница 26

Series 2040 Test System

Series 2040 Maintenance Manual V2.00

Diagnostics

25

TRMAN (Tester Resource Manager)

The Tester Resource Manager is used to track and manage the tester resources

including all the boards in the Testhead and the UUT power supplies.

Information about these resources can be automatically generated or

manually defined, and is used to generate a Patchboard Interface Map and

define the pin locations of these resources at the Patchboard. This information

can be saved to a project specific file called resource.ini and can be used by

other Digalog System’s applications.

Specifically, the software is capable of printing out a “Patchboard Map”

containing Patchboard pin mnemonics by either automatically interrogating

the tester for its resources, or by asking the programmer to define the tester’s

resources. When the configuration is performed manually, it allows the

programmer to configure additional resources beyond what the tester

physically contains. In this manner, a programmer has the additional resources

to generate programs and fixtures for any tester.

Menu Bar

File Menu

 - The TRMAN 

F

ile menu is similar to the standard Windows  file

Содержание 2040D Series




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды